Q275FTE Wind Power Steel

GB/T 28410-2012 | High Strength Wind Tower Plate | -40°C Impact (34J)

📏 Standard: GB/T 28410-2012
🏗️ Wind Power Towers
❄️ -40°C Impact 34J (Grade E)
💪 Yield ≥275 MPa

Product Overview

Q275FTE is a high-strength structural steel plate manufactured in accordance with GB/T 28410-2012, specifically designed for wind turbine tower construction requiring superior load-bearing capacity and extreme low-temperature toughness. This grade provides higher yield strength (275 MPa) compared to Q235 series, excellent weldability, and guaranteed impact properties at -40°C, making it ideal for wind power installations in arctic, subarctic, and high-altitude regions requiring exceptional strength-to-weight ratio and cold resistance.

Key Advantages

  • Higher Strength Grade: Minimum yield 275 MPa (≤16mm) for lighter tower designs.
  • Guaranteed -40°C Impact Toughness: Minimum 34J at -40°C (Grade E) – ideal for arctic conditions.
  • Optimized Weldability: Low carbon (C≤0.18) and micro-alloying elements.
  • Strict Quality Control: Full traceability with EN 10204 3.1/3.2 certification.
  • Versatile Availability: Plates up to 100mm thick, coils upon request.

Technical Specifications

Q275FTE Chemical Composition (GB/T 28410-2012, mass fraction %)

Element Q275FT E (max or range)
C (max) 0.18
Mn 0.50~1.50
P (max) 0.025
S (max) 0.015
Si (max) 0.50
Nb (max) 0.050
V (max) 0.060
Ti (max) 0.050
Mo (max) 0.10
Cr (max) 0.30
Ni (max) 0.30
Cu (max) 0.30
Als (min) 0.015
N (max) 0.010
Note: The lower limit of Mn content for normalized plates as specified.

Quality & Manufacturing Assurance

🏭

Modern Production

Advanced continuous casting and controlled rolling

🔬

In-process Inspection

Spectral analysis, UT testing

📋

Full Documentation

MTC EN 10204 3.1/3.2

ISO 9001:2015 CE Marking (PED) SGS Inspection Mill Certificate 3.1

Packaging & Logistics

  • Standard Packaging: Steel plates bundled with steel straps on wooden skids. Coils wrapped with waterproof paper.
  • Marking: Grade, size, heat number, weight clearly marked.
  • Logistics: FOB, CIF, CFR from main Chinese ports.
  • Lead Time: 25-35 days after order confirmation.

Request a Quotation

Interested in Q275FTE high-strength steel for arctic wind towers? Fill out the form below. We'll reply within 12 hours.

This form uses Formspree. Your information will be sent securely.

Frequently Asked Questions

What is the advantage of Q275FTE over Q235FTE?

Q275FTE offers higher minimum yield strength (275 MPa vs 235 MPa) while maintaining the same -40°C impact toughness (34J), allowing for lighter and more efficient tower designs in arctic regions.

Is Q275FTE suitable for arctic offshore wind?

Yes, its guaranteed -40°C impact energy (34J) makes it ideal for arctic and subarctic offshore wind farms where extreme low temperatures are expected.

MOQ?

25MT for plates, 50MT for coils. Flexible for trial orders.

Third-party inspection?

SGS, BV, TÜV available upon request.