Q690FTE Wind Power Steel

Ultra-High-Strength Arctic Grade – 690MPa Yield, Guaranteed -40°C Impact Toughness (34J) for Mega Arctic Wind Turbine Towers

📏 Standard: GB/T 28410-2012
🏗️ Arctic / Subarctic Mega Wind Towers
❄️ Impact -40°C / 34J

Product Overview

This article introduces Q690FTE structural steel for wind turbine towers manufactured by Chinese steel mills, hoping to meet your needs and encourage you to purchase this grade of steel. Q690FTE provides 690 MPa minimum yield, excellent low-temperature toughness at -40°C (Grade E) with 34J guaranteed impact energy, and complies with GB/T 28410-2012 for high-strength wind tower construction in cold regions.

Q690FTE (Grade E) is an ultra-high-strength low-alloy structural steel plate specifically designed for next-generation mega wind power generation equipment requiring maximum load-bearing capacity and extreme low-temperature toughness for arctic conditions.

Key Advantages

  • Ultra-High Strength + Extreme Cold Toughness: 690MPa yield combined with guaranteed -40°C impact toughness (34J).
  • Optimized for Arctic Climates: Designed for mega wind towers in arctic and subarctic regions.
  • Excellent Weldability: Optimized chemical composition with low carbon equivalent ensures reliable fabrication.
  • Cost-Effective Arctic Solution: Ultra-high strength enables significant weight reduction for 15MW+ turbines in cold regions.

Domestic Grade Comparison: Q620FTE / Q690FTD

Q620FTE
Impact: -40°C

Yield: ≥620MPa

Tensile: 710-880MPa

Impact: 34J

Q690FTE ★
Impact: -40°C

Yield: ≥690MPa

Tensile: 770-940MPa

Impact: 34J

Q690FTD
Impact: -20°C

Yield: ≥690MPa

Tensile: 770-940MPa

Impact: 47J

Note: Q690FTE offers ultra-high yield strength (690MPa) with -40°C impact toughness (34J). Q620FTE has lower strength with same -40°C impact. Q690FTD has same strength but only -20°C impact.

Technical Specifications

Q690FTE Chemical Composition (GB/T 28410-2012, wt%)

Element Value / Range
C (max) 0.20
Mn (max) 1.80
P (max) 0.020
S (max) 0.010
Si (max) 0.60
Nb (max) 0.070
V (max) 0.15
Ti (max) 0.050
Mo (max) 0.50
Cr (max) 0.80
Ni (max) 0.80
Cu (max) 0.80
Als (min) 0.015
N (max) 0.010
Note: Tighter P/S control for enhanced low-temperature toughness at -40°C. Higher alloy content for ultra-high strength.

Applications

Arctic Mega Wind Turbine Towers (15MW+)

Primary application for Q690FTE, offering ultra-high strength (690MPa yield) and extreme -40°C impact toughness for the next generation of mega wind turbine tower structures in arctic and subarctic regions requiring maximum load-bearing capacity and cold resistance.

  • Heavy-duty tower shell sections for arctic mega wind turbines (15MW+)
  • Flanges, ring stiffeners, connection brackets requiring -40°C impact at 690 MPa
  • Transition pieces for tallest towers in polar environments
  • Offshore wind projects in polar seas demanding highest strength and cold resistance

Available Supply Range

📏 Thickness

  • Plates: 8-120mm
  • Coils: 2.0-12.0mm

📐 Width & Length

  • Width: 900-5300mm
  • Length: 6000-12000mm
Lead Time: 45-65 days for arctic-grade ultra-high-strength steel

Custom Fabrication Services

Custom Cutting

Edge Beveling

Drilling & Punching

Bending & Forming

Quality & Manufacturing Assurance

ISO 9001:2015
CE Marking
SGS/BV/TÜV

Packaging & Logistics

  • Bundled with steel straps on wooden skids
  • Marking: Grade, size, heat number, weight, impact grade E (-40°C)
  • FOB/CIF/CFR from main Chinese ports

Frequently Asked Questions

Q690FTE vs Q690FTD?

Q690FTE: -40°C impact (34J), Q690FTD: -20°C impact (47J). Q690FTE for arctic conditions.

Q690FTE vs Q620FTE?

Q690FTE has higher yield strength (690MPa vs 620MPa) with same -40°C impact, suitable for next-generation mega turbines.

Third-party inspection for -40°C?

Yes, SGS, BV, TÜV available including -40°C impact verification.

Request a Quotation

Interested in Q690FTE arctic-grade ultra-high-strength steel for extreme cold wind power projects? Please fill out the form below.